| 品牌 : | 德国LOCKE洛克 | 型号 : | LOCKE |
| 连接形式 : | 法兰 | 主体材料 : | 碳钢 |
| 公称通径 : | DN15-DN500 | 适用介质 : | 水 |
| 密封形式 : | 软密封型 | 标准 : | 德标 |
| 外形 : | 中型 | 流动方向 : | 双向 |
| 驱动方式 : | 手动 | 零部件及配件 : | 配件 |
| 用途 : | 截止 | 压力环境 : | 常压 |
| 工作温度 : | 常温 | 类型(通道位置) : | 直通式 |
进口高温对焊闸阀产品概述：
德国《LOCKE》洛克--进口高温对焊闸阀(High temperature welding gate valve)具有启闭迅捷、密封可靠、寿命长、重量轻、铸件工艺性好以及安装不需法兰、管件、垫片，并减少两个泄漏点等一系列优点，可 限度地满足各类用户的节能降耗、降本增盈及环保要求。
进口高温对焊闸阀性能范围：
公称压力 1.6-32.0Mpa
公称通径 DN15-500mm
适用介质 水，蒸汽，油品。根据材料的不同，可适用化工等腐蚀性介质，强氧化性介质，尿素等，水汽，油品等。
进口高温对焊闸阀产品特点：
1.流体阻力小,密封面受介质的忡刷和侵蚀小。
2.开闭较省力。
3.介质流向不受限制 ,不扰流、不降低压力。
4.形体简单,结构长度短，制造工艺性好，适用范围广。
Overview of imported high temperature butt welding gate valve products:
The high temperature welding gate valve (high temperature welding gate valve) imported from Germany has a series of advantages, such as fast opening and closing, reliable sealing, long service life, light weight, good casting process, no flange, pipe fitting and gasket for installation, and two leakage points are reduced, which can meet the requirements of various users for energy saving, cost reduction, profit increase and environmental protection.
Performance range of imported high temperature butt welding gate valve:
Nominal pressure: 1.6-32.0mpa
Nominal diameter DN 15-500mm
Suitable medium: water, steam, oil. According to different materials, it can be used in corrosive media such as nitric acid, strong oxidizing medium, acetic acid, urea, water vapor, oil, etc.
Features of imported high temperature butt welding gate valve:
The small sealing surface is eroded by the small resistance of the medium.
2. It is easy to open and close.
3. The flow direction of the medium is not limited, the flow is not disturbed and the pressure is not reduced.
4. Simple shape, short structure length, good manufacturing process and wide application range.